Independent home guides Honest picks — no paid rankings Guides updated regularly
smhomehubHome · Kitchen · Garden
Mattresses & pillows

Best Waterproof Mattress Protectors: Quiet, Cool and Budget Picks

The waterproof mattress protectors worth buying, how to stop them crinkling or sleeping hot, and how to wash them — with picks sold in the US and Australia.

We earn a commission if you buy through links on this page, at no extra cost to you. Learn more.

Neatly made bed with white bedding in a bright bedroom

The short answer

For most beds, the Bedsure quilted waterproof mattress protector is the best pick: a soft, quiet top over a thin TPU waterproof layer, with a deep pocket that stays put. On a budget, the Utopia Bedding terry protector does the job for guest and kids' beds. If you need protection from bed bugs or dust mites, choose a zip-up encasement like the SafeRest Premium. Look for TPU or polyurethane rather than vinyl, and wash it every one to two months.

  • TPU and polyurethane layers are quiet and breathable; vinyl crinkles and sleeps hot.
  • A protector is not a mattress pad. It protects the mattress but doesn't change how firm it feels.
  • Measure your mattress depth (including any topper) before choosing a pocket size.
  • Many mattress warranties are void if the mattress is stained, so a protector also protects your warranty.

A waterproof mattress protector is the cheapest insurance you can buy for one of the most expensive things in your home. One spilled coffee, a pet accident or a child’s bad night can stain a mattress for good and void its warranty. The trouble is that the wrong protector crinkles like a chip packet or makes you sweat.

This guide explains which types are quiet and cool and how to size one properly. It also covers how to wash a protector so it stays waterproof, which is where most of them fail. All three picks are sold on Amazon US and Amazon Australia.

Our picks at a glance

FeatureBest overallBedsure Quilted Waterproof Mattress Protector (deep pocket)Budget pickUtopia Bedding Waterproof Mattress Protector (terry top)Best for bed bugs and allergiesSafeRest Premium Zippered Waterproof Mattress Encasement
Best forMost beds — soft, quiet protection that doesn't feel like plasticGuest beds, kids' beds and tight budgetsBed bugs, dust-mite allergies, and total protection on all six sides
Price bandMid-rangeBudgetPremium
Waterproof layerTPULaminated backingPolyurethane membrane
TopQuiltedTerryCotton terry
FitDeep pocket fittedFitted elastic skirtFull zip encasement (choose 9–12 in or deeper)
CareMachine wash; tumble dry lowMachine wash; tumble dry lowMachine wash warm
Where to buyCheck priceCheck priceCheck price

Best overall: Bedsure quilted waterproof protector

This is our top pick for an everyday main bed. A quilted, cushioned top sits over a thin TPU waterproof layer. TPU is the quieter, more breathable alternative to vinyl. The result feels like a light mattress pad rather than a sheet of plastic. The deep-pocket skirt grips thicker mattresses and doesn’t creep off the corners overnight.

The trade-offs: the quilting traps slightly more warmth than a thin terry protector, and it takes longer to dry after washing. If you sleep very hot, choose a thin terry or bamboo-top protector instead.

Best budget pick: Utopia Bedding waterproof protector

With more than 100,000 US reviews, this is one of the most popular protectors on Amazon. Its soft terry top is quiet with no crinkle, the all-round elastic keeps it on even when kids use the bed as a trampoline, and it costs very little. That makes it ideal for guest rooms, kids’ beds and rentals.

The trade-offs: owners say it can sleep warm, and a minority report that large spills eventually soak through, usually after many hot washes. Treat it as an affordable, replaceable protector and test it now and then (see the FAQ).

Best for bed bugs and allergies: SafeRest Premium zippered encasement

A fitted protector covers the top and sides of the mattress. An encasement zips around the whole thing. That’s the only design that stops bed bugs moving in or out and keeps dust mites sealed away from allergy sufferers. SafeRest is the brand Wirecutter picks for waterproof protection. This zippered version is waterproof on top, with a covered zip end so bugs can’t slip through the gap.

The trade-offs: you have to lift the mattress to get it on, which is a two-person job for a queen or king. It’s also more effort to wash than a fitted protector. Many people use an encasement plus a washable fitted protector on top.

How to choose a waterproof mattress protector

1. Waterproof layer: TPU or polyurethane, not vinyl

Layer Noise Breathability Notes
TPU (thermoplastic polyurethane) Quiet Good The best all-rounder, found on most good protectors
Polyurethane membrane Quiet Good Similar to TPU and common on encasements
Vinyl (PVC) Crinkly Poor Cheap, hot and noisy, so avoid it for adults
Wool (puddle pad) Silent Excellent Natural and plastic-free, but water-resistant rather than fully waterproof

2. Top fabric: decides how it feels

  • Terry cotton: absorbent, quiet, slightly warm.
  • Quilted fill: soft and cushioned, warmest, slowest to dry.
  • Bamboo / Tencel: smooth, cooler and silky, usually pricier.
  • Smooth polyester knit: cheapest; can feel slick.

3. Fit: measure the mattress depth

Measure from the bottom seam to the top of the mattress, including any topper. Then choose a protector whose pocket is 5–8 cm (2–3 in) deeper so the elastic tucks underneath.

Mattress depth Choose a pocket of at least
Up to 25 cm / 10 in Standard (30 cm / 12 in)
25–35 cm / 10–14 in Deep (38 cm / 15 in)
35–45 cm / 14–18 in Extra-deep (45 cm / 18 in)

4. Fitted protector vs encasement

  • Fitted (like a sheet): easy on and off, easy to wash, protects against spills and sweat.
  • Zippered encasement: seals all six sides; choose it for bed bugs and dust-mite allergies.

5. Certifications

OEKO-TEX Standard 100 means the textiles were tested for harmful substances. It’s worth looking for on anything you sleep on every night.

How to wash a waterproof mattress protector without ruining it

Most protectors stop being waterproof because of heat and harsh chemicals, not age.

  1. Wash warm, not hot. Check the care label, but around 40 °C / 104 °F is usually safe.
  2. Use mild detergent. Skip bleach and fabric softener, which coat and break down the membrane.
  3. Dry on low heat or air-dry. High dryer heat is the number one cause of cracked, leaking protectors.
  4. Dry it completely before putting it back on the bed, to avoid a musty smell.
  5. Test it twice a year: lay it over a towel and pour a little water on a corner. If the towel gets wet, it’s time for a new one.

Common problems (and fixes)

  • It crinkles: you likely have a vinyl backing. Switch to TPU or polyurethane.
  • It sleeps hot: choose a thinner terry or bamboo top, and avoid quilted fill and vinyl.
  • It won’t stay on: the pocket is too shallow. Size up a depth range.
  • It leaks in the middle: the membrane is worn or heat-damaged. Replace it and dry the new one on low heat.
  • It smells musty: it wasn’t fully dry before going back on. Rewash and air-dry in the sun.

Cleaning up after a spill that already got through? Follow our guide on how to deep clean a mattress.

Buying in Australia?

All three picks are listed on amazon.com.au with the same product numbers. Australian and US bed sizes differ slightly. An Australian queen is 153 × 203 cm, while a US queen is 152 × 203 cm, so they’re usually interchangeable. Australian and US kings are not the same size, though, so always check the listing’s dimensions before you order.

The bottom line

Buy the Bedsure quilted protector for your main bed, the Utopia Bedding protector for guest and kids’ beds, and a SafeRest zippered encasement if bed bugs or dust-mite allergies are a concern. Whichever you choose, wash it gently, dry it on low heat, and test it twice a year.

Common questions

Do waterproof mattress protectors make you sweat?

Cheap vinyl protectors can, because they don't breathe. Protectors with a thin TPU or polyurethane membrane under a cotton, terry or bamboo top let more air and moisture through and feel much cooler. If you sleep hot, avoid vinyl and thick quilted tops and look for "breathable" or "cooling" fabrics.

Are waterproof mattress protectors noisy?

Modern TPU and polyurethane protectors are close to silent under a fitted sheet. The crinkly, plastic-bag sound comes from vinyl (PVC) backings, which are now uncommon on good protectors.

Can you tumble dry a waterproof mattress protector?

Yes, on a low or delicate heat setting. High heat can crack or melt the waterproof membrane, which is the most common way protectors stop being waterproof. Air-drying is gentlest. Avoid bleach and fabric softener, which also damage the membrane.

How often should you wash a mattress protector?

Every one to two months for most people, or every week or two if you have allergies, pets in the bed or young children. Wash it straight away after any spill or accident.

How often should you replace a mattress protector?

Roughly every one to three years, or sooner when it starts leaking, the elastic goes slack, or the fabric pills and thins. Test it by pouring a little water on a corner over a towel. If it soaks through, replace it.

Is a mattress protector the same as a mattress pad?

No. A protector is a thin, usually waterproof layer that keeps spills, sweat and allergens out of the mattress. A pad or topper adds cushioning to change how the bed feels. Some quilted protectors add a little softness, but they won't fix a hard or sagging mattress.

Do I really need a mattress protector?

If you want your mattress to last and its warranty to stay valid, yes. Many manufacturers void the warranty if the mattress is stained, and a single spill or accident can ruin foam. A protector costs a small fraction of a new mattress.

Do mattress protectors stop bed bugs?

Only full zippered encasements that seal all six sides, with fine fabric and a covered zip, stop bed bugs from getting in or out. Fitted, sheet-style protectors cover only the top and sides, so they don't.

Are waterproof mattress protectors safe?

Look for an OEKO-TEX Standard 100 certification, which means the fabric has been tested for harmful substances. Many people also prefer TPU over vinyl. If you want to avoid plastics entirely, wool puddle pads are a natural alternative, though they're water-resistant rather than fully waterproof.

Sources

Mohsin, founder and editor

Mohsin founded smhomehub to cut through the noise of product listings and give straight answers to everyday home, kitchen and garden questions. He edits every guide on the site.

Our picks combine independent testing (including Wirecutter's), product specifications and patterns across more than 100,000 Amazon owner reviews. Every pick is sold on both amazon.com and amazon.com.au. Sections marked for first-hand notes will be updated as we use these protectors at home. How we choose products.