Best Patio Furniture Covers: Waterproof, UV-Proof and Wind-Proof Picks
The best outdoor furniture covers for sofas, dining sets and chairs — plus how to measure, and how to stop covers blowing off, pooling water or growing mold.
We earn a commission if you buy through links on this page, at no extra cost to you. Learn more.
The short answer
The best patio furniture cover depends on the piece. Use the Classic Accessories Veranda for outdoor sofas, an ULTCOVER 600D cover for a whole dining set, and Duck Covers Ultimate for chairs. Choose a cover 5–10 cm (2–4 in) larger than your furniture, with vents to stop mold and straps or a drawcord to stop it blowing away. In strong sun, like Australia's, look for 600D fabric with a UV-resistant coating, and expect to replace covers every three to five years.
- Measure width, depth and height, then choose a cover slightly bigger, never smaller.
- Vents matter as much as waterproofing; trapped moisture causes mold underneath.
- Water-resistant covers shed rain; waterproof covers stop it, but need vents to avoid condensation.
- Prop up the middle of flat table covers so rainwater doesn't pool and leak through.
Outdoor furniture covers protect your furniture from sun, rain, leaves and bird droppings, so cushions don’t fade and metal doesn’t rust. The problem with most “best cover” lists is that they stop at the product. They don’t explain how to measure, why covers grow mold underneath, or how to stop one blowing into the neighbor’s yard. This guide covers all of that.
All three picks are sold on Amazon US and Amazon Australia, in a range of sizes.
Our picks at a glance
| Feature | Best for sofasClassic Accessories Veranda Water-Resistant Patio Sofa/Loveseat Cover | Best for dining setsULTCOVER Waterproof Patio Table & Chair Set Cover (600D) | Best for chairsDuck Covers Ultimate Waterproof Patio Chair Cover |
|---|---|---|---|
| Best for | Outdoor sofas and loveseats, especially with cushions | Rectangular or oval dining sets with the chairs pushed in | Lounge chairs and stacked dining chairs |
| Price band | Mid-range | Budget | Budget |
| Material | Polyester fabric, water-resistant backing | 600D polyester with PVC coating | Laminated polyester |
| Waterproof | Water-resistant | Yes | Yes |
| Vents | Yes | Yes | Yes |
| Fastening | Elastic hem + strap | Straps + drawcord | Click-close straps |
| Where to buy | Check price | Check price | Check price |
Best for sofas: Classic Accessories Veranda
The Veranda has been a top-selling sofa cover for years because it looks like fabric, not a plastic tarp. That matters on a deck you actually look at. It has padded handles so you don’t tear it pulling it off, an elastic hem cord and click-close strap to keep the wind out, and vents to let moisture escape. Owners say it fits loveseats with cushions well and stays put in wind.
The trade-offs: it’s water-resistant, not fully waterproof, so water that pools on the seat can eventually seep through. Make sure it slopes, and measure deep sofas carefully because sizes run snug.
Best for dining sets: ULTCOVER 600D waterproof set cover
One large cover over the table and the chairs (pushed in) is faster than covering each piece. ULTCOVER’s set cover uses 600D polyester with a waterproof, UV-resistant coating. It has two side vents, adjustable corner straps and a drawcord hem. It’s one of the most-reviewed covers on Amazon in both countries.
The trade-offs: it’s bulky to fold, and on a flat table, water can pool in the middle unless you prop it up (see “How to stop water pooling” below).
Best for chairs: Duck Covers Ultimate
Better Homes & Gardens picks this as its best chair cover. It’s a tough, laminated waterproof fabric with click-close straps that hold it down in wind, and it comes in sizes for single lounge chairs or stacks of dining chairs.
The trade-offs: the fabric is stiffer and more utilitarian-looking than fabric-style covers. Choose the size by your chair’s measurements, not its name.
How to measure for a patio furniture cover
A cover that’s too small tears at the seams; one that’s too big flaps, catches wind and pools water.
- Width: measure the widest point side to side, including armrests.
- Depth: measure front to back at the deepest point.
- Height: measure from the ground to the highest point (usually the backrest).
- Add 5–10 cm (2–4 in) to width and depth. Height can match or run slightly longer, but the cover should stop just above the ground so air can flow.
- Dining sets: push the chairs in, then measure the whole set as one shape (round, square or rectangular).
What to look for in a cover
Fabric strength (denier)
Denier (D) measures how thick the fibers are. 300D suits sheltered spots; 420D is a good middle ground; 600D is heavy-duty and lasts longest in strong sun and wind.
Waterproof vs water-resistant
- Water-resistant: sheds light rain; pooling water can soak through. Often more breathable and better looking.
- Waterproof: has a PVC or PU coating or laminate that stops water. It must have vents, or condensation forms underneath.
UV resistance
Sunlight breaks down fabric, which is why cheap covers turn brittle and crack. Look for a UV-resistant coating or solution-dyed fabric. This matters most in high-UV places like Australia and the US Southwest.
Vents
Vents let humid air escape. Without them, a waterproof cover traps moisture and grows mold and mildew on your cushions, which is the most common complaint about covers.
Fastenings
Look for adjustable straps or buckles, an elastic or drawcord hem, and handles. Several fastening points beat one.
How to stop common cover problems
Water pooling on table covers
Put something taller in the middle of the table, such as an upturned bucket, a cover support pole or an inflatable “air bag” support. That tents the cover so rain runs off instead of collecting.
Covers blowing off
Tighten every strap, pull the drawcord snug around the legs, and add bungee cords under the furniture in very windy spots. A well-fitted cover rarely blows off; a loose one acts like a sail.
Mold and mildew underneath
Make sure the vents aren’t blocked, don’t let the cover touch the ground, and remove it to air things out after long wet spells. Store cushions indoors or in a deck box during wet seasons.
How to clean and store patio furniture covers
- Brush off loose dirt and leaves.
- Hose it down, then scrub with a soft brush and mild dish soap in warm water.
- Rinse well and air-dry completely, inside and out.
- Don’t machine wash or tumble dry unless the label says it’s safe, because heat and agitation crack waterproof coatings.
- Store dry, loosely folded, in a breathable bag. Never pack a damp cover.
Buying in Australia?
All three covers are listed on amazon.com.au with the same product numbers. Sizes are often in inches, so convert carefully (1 in = 2.54 cm). In Australia’s strong UV, choose 600D fabric with a UV coating and expect to replace covers more often than in milder climates.
The bottom line
Use the Classic Accessories Veranda for outdoor sofas, an ULTCOVER 600D set cover for dining sets, and Duck Covers Ultimate for chairs. Whatever you buy, measure first, size up slightly, make sure it has vents and straps, and prop up flat tops so water runs off.
Planning the rest of your outdoor space? See our Outdoor & Garden guides, including the best wood for raised garden beds.
Common questions
Are patio furniture covers necessary?
They're not essential, but they make outdoor furniture and cushions last much longer by blocking UV fading, rain, bird droppings, pollen and leaves. Covers are cheap compared with replacing a rusty table or sun-bleached sofa. If you can store furniture in a shed or garage over winter, that's even better.
Are patio furniture covers waterproof?
Some are fully waterproof (coated 600D polyester or laminated fabric), while others are water-resistant (they shed light rain but can let pooling water through). Check the listing for the words waterproof and coated. Even waterproof covers need vents so condensation can escape.
Can you machine wash outdoor furniture covers?
Most should not go in a washing machine, because agitation and heat can crack the waterproof coating. Hose them down, scrub with a soft brush and mild soapy water, rinse, and let them dry completely before folding. Follow the care label if it says otherwise.
How do I stop my patio cover blowing away?
Choose a cover with adjustable straps, buckles or a drawstring hem, and tighten them around the legs. Add bungee cords under the furniture or a weight bag in very windy spots. A snug fit helps most, because loose covers catch the wind like a sail.
How do I stop water pooling on my table cover?
Place something taller in the middle of the table, such as an upturned bucket, a cover support pole or an inflatable air bag, so the cover forms a tent shape and water runs off. Pooling water eventually leaks through and can stretch the fabric.
How long do patio furniture covers last?
Typically two to five years, depending on sun exposure and fabric quality. In high-UV climates like Australia's, cheaper covers can become brittle in a couple of summers. 600D fabric with a UV coating lasts longest.
How should I store outdoor furniture covers when not in use?
Clean them, dry them completely, then fold or roll them loosely and store them in a breathable bag somewhere dry. Never store a damp cover, because mold and mildew will set in.
Should I leave cushions on patio furniture under a cover?
For short periods, yes, if the cover is well ventilated. For long periods or wet seasons, store cushions indoors or in a deck box, because trapped humidity can still cause mildew even under a good cover.
What size cover should I buy?
Measure your furniture's width, depth and height at the widest points, then choose a cover 5–10 cm (2–4 in) larger in width and depth. For dining sets, measure with the chairs pushed in. Too tight and it will tear; too loose and it will flap in the wind.